GasDNA

  • Filter
Category: Smoke sensor
Created on: 22 October 2014

TS-60 is built-in Non contact Infrared thermometer and smoke sensor. The most of existing temperature and smoke sensors in markets can detect fire after the heat reach to temperature and smoke detector. However, TS-60 detects the fire by increased infrared amount and low concentrated smoke in early stage of the fire and enables to prevent the fire in advance.

Category: Smoke sensor
Created on: 22 October 2014

SD-110 is a microprocessor internal 2-channel smoke detector. SD-110 is an environment-adaptive smoke detector which displays the concentration on the back light LCD by receiving the serial signals from two sensors and by processing them in the digital mode, and performs the variety of local functions in digital process mode. Also, it can ensure the effective remote control by stably outputting the analog serial signals to external control unit such as PLC/DDC. As one of big advantages of SD-110, it can be suitably applicable for various purposes by processing the sensible signals detected by ionization sensor by microprocessor stably and accurately. Because the existing smoke detectors have been mostly applied only for a fire alarm, it is general that they don’t ensure an accuracy and safety for a utility of industrial field. SD-110 is designed to ensure a sensibility and safety simultaneously by controlling the sensible ionization sensor with an industrial detector technology.

Category: Smoke sensor
Created on: 22 October 2014

SD-50, the smoke detector with built-in micro processor, receiving signal from sensor and comparing it with preset alarming value, if it exceeds, transmits the relay output to be connected to PLC/DDC. Usually, the other smoke detectors designed only for fire alarm cannot be used for industrial use because it cannot secure enough accuracy and stability. However, SD-50 accommodating highest accurate ionization sensor and industrial detector technology, secures best accuracy and stability at the same time.

Category: Gas Detector
Created on: 22 October 2014

IAQ-700 is a high accuracy indoor air quality monitor, which measure VOC. CO2, Temperature, Humidity and dust. Through large size of graphic LCD, it provides real-time monitoring and can transmit data wirelessly through built in ZigBee. After install indoor Watch (software), it enable to collect data at a long distance. Relay Contact make it possible to interwork with a ventilating system. It has been installed to measure Air quality of indoor or underground spaces like Factories, schools, Public places etc.

Created on: 22 October 2014

GMS-2000 is multi-channel digital controller to monitor gas leakages from more than one gas detectors simultaneously. GMS-2000 is composed of one alarming unit & more than one receiving units. While each receiving units in GMS-2000 receive density signals from external gas detectors, when the density becomes higher than alarm value, receiving units automatically give signal to alarming unit to sound alarm. GMS-2000 transmits the relay output and standard current output signal 4-20㎃ to various controllers such as PLC, DDC, recorders, and computers for composition of integrated gas monitoring system.

Created on: 22 October 2014

GMS-1500 is four channel digital controller which can be connected to four (4) gas detectors. Receiving analogue continuous signal from four (4) detectors and converting it into digital signal, GMS-1500 provides various alarming and monitoring environment by micro-processor. Also, GMS-1500 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily construct the gas monitoring system more extensive as well as more comprehensive.

Created on: 22 October 2014

GMS-1000 is one point digital controller which can be connected to only one(1) gas detector. Receiving analogue continuous signal from one (1) detector and converting it into digital signal, GMS-1000 provides various alarming and monitoring environment by micro-processor. Also, GMS-1000 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily construct the gas monitoring system more extensive as well as more comprehensive.

Category: Gas Detector
Created on: 22 October 2014

DA-91 series detects leakage of various toxic or combustible gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance.