DKK-TOA
Measures chloride demand of water and estimates chlorine injection level; best suited for feed forward control Meas. range From 0 - 5 mg/L to 10 mg/L (ppm) From 0 - 10 mg/L to 20 mg/L (ppm)
Measures free residual chlorine of clean water continuously with the reagentless polarographic method RS-485 equipped as standard specification; compatible with Modbus communication system Freely mountable on walls, racks, etc. for the compact lightweight design Meas. range 0 - 1/2, 0 - 1/3, 0 - 2/3 mg/L (ppm) (2-range)
Hermetically sealed 2-electrode type detector featured with excellent heat-proofing and pressure tightness Pipeline-insertion/immersion/flow-through/throw-in/leadless, etc. type available Four types of cell constants available: 0.01, 0.1, 1.0, 10 cm-1 Meas. range Minimum : 0 - 0.2 μS/cm Maximum : 0 - 20 mS/cm
Single-function (no indication) conductivity analyzer for field installation Easy installation for the one-unit amplifier and detector Output: 4 - 20mADC Power supply: 100VAC Meas. range AA-1: 0 - 2 μS/cm to 0 - 10000 μS/cm AA-2: 0 - 0.2/0.5/1.0 μS/cm
Automatic Burette ABT-511 Precising dispensing system (stable quantitation and speed) Titration burette (manual titration) supported GLP compliance Sampling mode loaded(measure/dilution) RS-232 equipped as standard specification
Enables bacteria and cell measurements in 50 sec. Highly sensitive measurement at 1 - 1000 cells/mL level Enables direct measurement of membrane filter Compliant to sanitary management by swap test Useful functions such as ATP concentration and cell converted value available Automatic reagent dispenser is optional (DF-10 sold separately)
Continuous measurement of alkalinity data in water purification process by coulometric titration method Requires only 1/4 reagent volume of existing model RS-485 equipped as standard specification; compatible with Modbus communication system Freely mountable on walls, racks, etc. for the compact lightweight design Meas. range 0 - 50/100 mg/L (ppm) (2-ranges)
Resistivity Analyzer for Ultra-Pure Water AQM-100A Compact DIN 96 size Best suited for water quality control in ultra-pure water production lines Two detectors connectable Meas. range 0.00 - 20.00 MΩ・cm