You have 0 items in your cart.
Products
Sub Categories
Laboratory-grade accuracy ±0.03 to ±0.05% Quick readout without error Excellent long-term stability: The resistance elements are made of selected manganin wire, stabilized by both artificial and natural aging after being wound. Perfect guard system Stable measurement: The dial switches offer low contact resistance and little change due to aging, giving stable operation. Inner/outer contact type plugs are used for changing the multiplication factor, assuring little change in the resistance due to reinsertion of plugs. Built-in standard resistors Bar resistor measurement
The 2553A provides well used K,T,E,J, and an additional 6 types of thermocouples. These 10 types are all regulated in IEC. It also provides widely used Pt100 as an RTD. Resistance as well as temperature value can be set as an output value, enabling instrument calibration by both values.
The PX8000 Precision Power Scope was released as high frequency and transient power measurement of electric energy saving equipment. In order to support that measurement and evaluation, we released dedicated software 760881 PowerViewrPlus. This software enables measured waveform and numeric data transfer to a personal computer (PC) and realizes smooth calculation and analysis.
Power Consumption Measuring Software Now at Yokogawa we have a comprehensive solution with our new standby power consumption measurement software. Meets the Requirements of IEC62301 Ed2.0(2011) Household electrical appliances - Measurement of standby power and EN 50564:2011 Electrical and electronic household and office equipment – Measurement of low power consumption. New standby power consumption measurement software that conforms with the testing methods specified in the IEC62301 Ed2.0(2011) standard and EN 50564:2011 has been introduced for the Yokogawa range of digital power analyzers. The new software, available for the Yokogawa WT3000, WT1800, WT1600, WT500, WT210 and WT310 analyzers, allows the user to perform measurements according to IEC62301 Ed2.0(2011): Household electrical appliances - measurement of standby power and EN 50564:2011 - Electrical and electronic household and office equipment – Measurement of low power consumption. The software sets up the appropriate test conditions by 3 type measuring mode(Ed1.0/Ed2.0(auto)/Ed2.0(manual), measures the power values, and creates a test report based on the requirements of the IEC62301 Ed2.0(2011) and EN...
Model 2041 single-phase wattmeters and single-phase low-power-factor wattmeters and Model 2042 three-phase wattmeters are electrodynamometer type wattmeters with indicators based on taut-band suspension. They can handle DC and frequencies from 25 Hz to 1000 Hz, and provide excellent power factor characteristics. These instruments are shielded with dual permalloy sheets as protection against external magnetic fields.
Model 2039 is a revolutionary series of portable wattmeters in which a power factor is used to operate the DC indicator. This is done using a transducer which provides a DC current proportionate to the voltage-current phase by means of a circuit. Model 2039 can be used in single-phase and balanced three-phase circuits. The electronic transducer, combined with a high sensitivity moving coil type indicator based on YOKOGAWA's proprietary taut-band suspension system, provides a level of performance not possible with conventional power factor meters.
Versatile data storage and transfer
Compact and lightweight